1. During the installation of plastic pipes, the impact of the environment on the installation quality shall be taken into account. Generally, when the temperature is higher than 40 ℃ or lower than 0 ℃, the construction and installation shall not be carried out.
2. Due to the large linear expansion coefficient of plastic pipeline, which is generally about 8 times of steel, thermal compensation shall be considered during installation, which is mainly natural compensation. PTFE compensator or PTFE corrugated expansion joint can also be used for compensation.
3. Pipes specially laid overhead shall be supported by pipe supports. The pipe supports can be made of angle steel and steel pipes with opposite sections, so that the pipes can expand and contract freely on the pipe supports. See the table below for the distance between pipe supports;
4. For buried pipes, the burial depth is generally less than 0.7m, and they are not affected by ground traffic. The excavated pipe trench should be flat, and the hard objects such as stones, broken bricks, glass, etc. at the bottom and on both sides of the trench should be removed. High quality backfill should be used for soil restoration, and the soil around the pipe should be filled tightly without gravel.
Jan 02, 2023
Leave a message
PS board, PP board, PE board, thick board blister processing
Send Inquiry





