Extruded Thickness 2-80mm Nylon Sheet And Diameter 20-200mm Rod
Zhejiang Zero Engineering Plastics Co., Ltd. is one of the leading manufacturers and suppliers of extruded thickness 2-80mm nylon sheet and diameter 20-200mm rod in China. If you're going to wholesale bulk advanced extruded thickness 2-80mm nylon sheet and diameter 20-200mm rod made in China, welcome to get free sample from our factory. All customized products are with high quality and competitive price.
Products Description
Nylon sheet or sheet is a flat, rigid plastic material that is commonly used in applications that require high-strength and wear-resistance, such as bearings, gears, seals, and electrical insulators. It is also used in the construction of tanks, silos, liners, and other chemical-resistant structures due to its excellent chemical and corrosion resistance. Nylon sheet can be machined, drilled, and cut using standard woodworking tools, and it can be fastened with screws, bolts, or rivets.
Nylon rod or rod is a cylindrical plastic material that is widely used in industries that require strong and lightweight components, such as aerospace, automotive, and medical fields. It has a high-strength-to-weight ratio, which means it provides excellent mechanical strength and stiffness while remaining relatively lightweight. Nylon rod can be easily machined, turned, and drilled using a lathe or a milling machine.
Products Performance
- High strength and stiffness
- Good impact resistance
- Excellent wear-resistance
- Good dimensional stability
- High melting point and heat resistance
- Good chemical and corrosion resistance
Products Application
- Bushings, bearings, and thrust washers
- Gears, sprockets, and pulleys
- Seals, gaskets, and O-rings
- Structural components for machines and equipment
- Electrical connectors and insulators
- Medical and dental instruments and implants
- Automotive and aerospace parts and components
- Sports equipment and consumer goods
|
Mechanical Properties METHOD UNIT VALUE |
|||
|
Specific gravity |
ASTM D792 |
g/cm3 |
1.13 |
|
Tensile yield strength |
ASTM D638 |
Mpa |
74 |
|
Breaking elongation |
ASTM D638 |
% |
5 |
|
Bending strength |
ASTM 790 |
Mpa |
90 |
|
Flexural modulus |
ASTM 790 |
Mpa |
2200 |
|
Shore hardness |
ASTM D2240 |
D |
85 |
|
Impact strength |
ASTM D256 |
J/M |
50 |
|
Thermal Properties |
METHOD UNIT VALUE |
||
|
Melting point |
DSC |
℃ |
220 |
|
Heat distortion temperature |
ASTM D648 |
℃ |
70 |
|
Operating temperature |
﹣ |
℃ |
85 |
|
Maximum operating temperature |
﹣ |
℃ |
160 |
|
Thermal conductivity |
DIN 52612- 1 |
W/(K-M) |
0.23 |
|
Coefficient of linear thermal |
ASTM D696 |
10 5- 1/K |
8 |
|
expansion Electrical Properties |
METHOD UNIT VALUE |
||
|
Dielectric strength |
ASTM D150 |
KV-mm |
25 |
|
Dielectric loss factor |
ASTM D150 |
﹣ |
0.032 |
|
Volume resistivity |
ASTM D257 |
Ω .cm |
1014 |
|
Surface resistivity |
ASTM D257 |
Ω |
1016 |
|
Dielectric constant |
ASTM D149 |
﹣ |
4.2 |
|
Chemical Properties |
METHOD UNIT VALUE |
||
|
Water absorption |
23℃ 60%RH |
% |
1.28 |
|
Acid resistance |
23℃ 60% RH |
﹣ |
|
|
Alkali resistance |
+ |
||
|
Acid and alkali resistance |
+ |
||
|
Resistance to sodium chlorate |
0 |
||
|
Resistance to aromatic compounds |
+ |
||
|
Resistance to ketone |
23℃ 60% RH |
+ |
|
|
Resistance to hot water |
23℃ 60% RH |
+ |
|
|
Others |
METHOD UNIT VALUE |
||
|
Flammability |
UL 94 |
HB |
|
|
Viscosity |
﹣ |
+ |
|
|
Non toxic |
EEC 90/ 128 FDA |
+ |
|
|
Coefficient of friction |
DIN 53375 |
0.36 |
|
Hot Tags: extruded thickness 2-80mm nylon sheet and diameter 20-200mm rod, China extruded thickness 2-80mm nylon sheet and diameter 20-200mm rod manufacturers, suppliers, carbon peek, glass filled peek, peek 450 g, peek cost per kg, peek operating temperature, peek plastic
You Might Also Like
Send Inquiry