HDPE VS POM Material

HDPE VS POM Material

Natural PEEK is a high-performance engineering thermoplastic that offers a unique combination of excellent properties, making it suitable for various applications in different scenarios. This material is an ideal choice for applications that demand extreme performance in terms of strength, stiffness, and resistance to high temperatures.
Send Inquiry
Product Introduction

Zhejiang Zero Engineering Plastics Co., Ltd. is one of the leading manufacturers and suppliers of hdpe vs pom material in China. If you're going to wholesale bulk advanced hdpe vs pom material made in China, welcome to get free sample from our factory. All customized products are with high quality and competitive price.

 

 

Products Description

HDPE and POM are both plastic materials that have a wide range of uses in industrial production. However, there are distinct differences between them. This article will introduce the difference between HDPE and POM to help readers better understand these two materials.

 

First of all, HDPE is an abbreviation for high-density polyethylene, which is a semi-crystalline thermoplastic. It has a high density and strength, and at the same time has very good corrosion and chemical resistance. This makes HDPE widely used in many fields such as pipes, trash cans, water tanks, etc. In addition, HDPE is also an eco-friendly material that can be recycled.

 

Secondly, POM is an abbreviation for polyoxymethylene, which is a crystalline plastic. POM has high strength and hardness, but also has very weak water absorption, wear, oil, acid and alkali resistance. This makes POM widely used in manufacturing mechanical parts, auto parts, electrical equipment, and other fields. The advantage of POM lies in its wear-resistant performance and non-deformation characteristics, which can maintain stability during long-term use.

 

The biggest difference between the two is their chemical properties. HDPE is an inert material whose surface is not easily corroded, whereas the surface of POM is prone to corrosion. In addition, the molecular structure of HDPE is simpler than that of POM, making HDPE easier to process. POM is more difficult to process and requires relatively high processing skills and equipment.

 

Maggie Liao

Moble/Whatsapp/Wechat: 86 15355139387

Speilized in Extruded POM PEEK PPS PET sheet and rods.

Specification of PEEK Rod produced in Zero Engineering Plastic

PEEK (PolyEtherEtherKetone) Semimanufacture             Trademark: ZECAN@               Unit:mm,g/cm³
Virgin-PEEK ROD Grade Diameter Longth Gravity Color
Virgin Grade 6,8,10,12,15 1000/3000 1.32

Natutal

Black

Virgin Grade 18,20,25,,28,30 1000/3000 1.32
Virgin Grade 35-85 1000/3000 1.32
Virgin Grade 90,100,110,120,130,140 1000/3000 1.32
Virgin Grade 150,160,170,180,200,210,220 1000 1.32

 

Performance Parameter Table of PEEK Rod

Test Item Test Method Result
Tensile test ISO 527-1:2012&ISO 527-2:2012 Tensile Strength 97MPa
Elongation at Break 12.60%
Flexural Test ISO 178:2019 Method A Flexural stress at conventional deflection 119MPa
Maximum flexural stress 156MPa
Flexural Modulus 3364MPa
Charpy Notched Impact Strength ISO 179-1:2010 3.7KJ/㎡ C(complete destruction)
Rockwell Hardness ISO 2039-2:1987 112
Specific Gravity ISO 1183-1:2019 Method A 1.302
Water Absorption ISO 62:2008 Method 1 0.06%
Vertical Burning UL 94-2013 Rev.9-2018 Section 8 V-0
Mean Coefficient of Linear Thermal Expansion ISO 11359-1:2014&ISO 11359-2:1998 Method A 100~120℃ 59×10-6K-1
140~200℃ 173×10-6K-1
Deflection Temperature under Load ISO 75-1:2020&ISO 75-2:2013 Method A 181℃  
Melting extrapolated onset temperature, Teim ISO 11357-3:2018 323.7℃ 325.6℃
Melting peak temperature, Tpm 339.9℃ 341.3℃
Melting extrapolated end temperature, Tefm 348.3℃ 347.2℃

Hot Tags: hdpe vs pom material, China hdpe vs pom material manufacturers, suppliers, high temperature peek, peek thermoplastic properties, peek valve plates, pom c PK pom h, pom poms jonas brothers sheet music, pom sheet uses

Send Inquiry

whatsapp

Phone

E-mail

Inquiry